Muscle biostimulation circuit
Muscle biostimulation circuit is particularly suitable for the treatment of cellulitis, powered by 3V battery.
Component BOM:
R1 180K 1 / 4W Resistor
R2 1K8 1 / 4W Resistor (see Notes)
R3 2K2 1 / 4W Resistor
R4 100R 1 / 4W Resistor
C1 100nF 63V Polyester Capacitor
C2 100µF 25V ElectrolyTIc Capacitor
D1 LED Red 5mm.
D2 1N4007 1000V 1A Diode
Q1, Q2 BC327 45V 800mA PNP Transistors
IC1 7555 or TS555CN CMos TImer IC
T1 220V Primary, 12V Secondary 1.2VA Mains transformer (see Notes)
SW1 SPST Switch (Ganged with P1)
B1 3V Battery (two 1.5V AA or AAA cells in series etc.)
JoyLED indoor fine pitch Led Display adopting positioning pins to achieve structural installation, fast and reliable. Built-in lock system in the LED display cabinet, seamless splicing and assembling.
Avoiding transmission failures caused by traditional signal connectors and flat wire. Failure rate decreases by 60%.
Real-time monitoring on operating status.
Automatic fault diagnosis, positioning and warning of failures.
Die-casting aluminum LED cabinet,360° convection ventilation design.
Intelligent control and player system by cloud technology.
Timely managing real-time information on operating status and potential failure.
3D/2D freely switching, without additional devices.
Indoor Fine Pitch Led Display,Led Fine Pitch Display,Fine Pixel Pitch Led Display,Fine Pitch Commercial Led Display
Shenzhen Joy LED Display Co., Ltd. , https://www.joe-led.com