Analysis of software structure of monitoring image processing system

Function of image software system

In the current image processing system for computer memory, the Windows operating system, PCI bus, single-screen operation mode are generally adopted, and image communication technology is also integrated. The current image software system should generally have the following functions:

1. Image input and output

The input of images mainly includes the image input of cameras, scanners, and digital cameras; the output of images mainly includes the image output of printers, video copiers, and monitors. To realize the function of embedding input and output devices into the image software system to complete image input and output, it is necessary to call or install device drivers of these devices.

2. Storage and loading of image files

The storage of the image file is to store the image in the frame storage or memory on the disk. The loading of the image file is to transfer the image file in the disk to the frame storage or memory. There is a problem with the image file format. The common BMP format is often used.

3. System management

The management of the system can be regarded as controlling the working state of the image hardware system. Such as the switching of input channels and output channels, the selection of storage, etc.

4. Image processing

There are many types of image processing, and the general categories are often used as the content of the first-level menu, such as grayscale conversion, image editing, image measurement, image enhancement, etc.

5. Image communication

Image communication includes the sending and receiving of images, and often involves the compression and transmission of images. Generally divided into static image compression and transmission and dynamic image compression and transmission. There are two image data sources for image compression and transmission: image data comes from the hard disk; image data comes from the hardware image system.

Hierarchical structure of image software system

Generally, the image software system is structured in layers. Figure 1 shows the layered structure of the image software system. The dotted frame in the figure is the image software system, where the bottom layer is the hardware driver layer, which mainly solves the connection problem with the hardware, the middle layer is the processing layer, and implements various algorithms. The top layer is data storage and communication.

In general, the following three methods can be used to drive hardware devices:

Provide high-level language calling subroutines;

· Provide installable device drivers;

· Provide universal device drivers.

In the Windows operating system, users can directly install drivers for devices such as printers and scanners. Because the Windows operating system already contains many peripheral device drivers, this is very convenient for users.

Image software system hardware device driver

The hardware device driver of the image software system should complete the following tasks:

· Operation of device configuration space on PCI bus;

· Operations on SAA7146 internal registers;

· Initialization of the video front-end subsystem;

· Maintenance of PC hardware interruption;

· Obtaining video image data buffer;

· Real-time display of video images;

· The realization of the overall software structure and special functions.

As can be seen from the data processing flow of the entire system, the image data buffer located in the host is the transfer link of the data flow from the external dedicated hardware platform to the host's internal general processing platform. The external image data is written into the buffer zone through the PCI bus interface control chip, and the internal software needs to read data from the buffer zone for processing and display.

Figure Hierarchical structure of image software system

The fiberglass cloth winding tube made of alkalifree glass fabric and binded with epoxy resin, in heatrolling and tightening, baking and curing, with high mechanical property and stable electrical property in high humidity, suitable for being used as insulation structural parts of mechanical, electrical and electronic equipment.

The epoxy glass fiber sleeve is made of alkali-free glass fiber impregnated with epoxy resin solution and is wound around the axis at an angle of 50 to 60 degrees. It is formed by uninterrupted fiber wet winding and heated and cured after molding Insulation products. The product has high temperature resistance. Good insulation performance, high electrical performance and mechanical strength are easy to be processed, and can be made into B-class, F-class, H-class heat-resistant insulating products according to user requirements.

Product diameter Φ5mm-Φ5000mm, product length> 20mm or more optional, product wall thickness> 2mm or more optional, product shape cylindrical tube, square tube, hexagonal tube, special-shaped tube, oval tube.

Fiberglass Tube

Fiberglass Tube,Fiberglass Winding Tube,Pultrusion Fiberglass Tube,Reinforced Pultrusion Fiberglass Tube

Yingkou Dongyuan Electrical Insulation Board Co.,Ltd , https://www.dy-insulation.com