What are the common faults of robot teach pendants? What should I do?

The robot teach pendant allows you to control the robot's movements step by step using the controller and its buttons. If you make a mistake, you can easily reset and try again, similar to how you would with a gaming console or remote-controlled toy. By guiding the robot along a specific path through the controller, you effectively "teach" it the desired motion. Once the robot has learned this sequence, it can repeat it autonomously. For those who want to take it further, advanced robot programming software is available. You can create detailed movement paths on your computer and upload them directly, eliminating the need for manual teaching. However, this approach works best when your machinery is highly precise and consistent. Non-standard or imprecise parts may require manual adjustments. --- **Fault One: Touch Position Deviation** 1. **Problem:** The finger touches a spot that doesn't align with the cursor on the screen. - **Cause:** During the calibration process after installing the teach pendant, the device wasn’t aligned properly with the center of the target. - **Solution:** Re-calibrate the touch position to ensure accuracy. 2. **Problem:** Certain areas respond correctly while others don’t. - **Cause:** Dust or debris has accumulated heavily on the sound reflection strips around the surface of the touch screen, disrupting the acoustic signals. - **Solution:** Clean the touch screen thoroughly, paying close attention to the reflective stripes on all four sides. Make sure to turn off the power supply to the touch screen control card before cleaning. --- **Fault Two: Touch Not Responding** **Problem:** The cursor doesn’t move when touching the screen, and no changes occur. - **Causes:** There are multiple potential issues: 1. Excessive dust or debris on the sound wave reflection strips around the touch screen could render it unresponsive. 2. The touch screen itself might have malfunctioned. 3. The touch screen control card could be faulty. 4. The touch screen signal cable may have failed. 5. The host’s serial port could be problematic. 6. The teach pendant’s operating system might be corrupted. 7. An incorrect installation of the touch screen driver could be causing issues. - **Solutions:** 1. Check the touch screen signal indicator light—it should flash regularly (about once per second) when functioning properly. When you touch the screen, the light should react accordingly. 2. If the screen goes black, first check if the backlight is set to save energy (this is normal). If not, verify that the system control area settings haven’t been tampered with. 3. If these checks don’t resolve the issue, consider updating the firmware to the latest version. If the problem persists, reach out to the manufacturer for assistance. This troubleshooting guide aims to help users quickly identify and fix common issues with their teach pendants. Proper maintenance and calibration are key to ensuring smooth operation!

Dual Purpose Battery

OREMA offers a high-quality dual purpose AGM Battery, a rechargeable lead-acid battery that is particularly suitable for Marine and camping vehicles. The dual purpose battery can be used not only as a starter, but also to power gear such as trolling motors. Using pure non-alloying lead materials and the most advanced plate design in the industry, OREMA batteries charge faster and last longer than traditional alloy AGM batteries, ensuring you're always ready for activities like weekend fishing.



OREMA batteries are known for their excellent sustained performance and total energy output, making them particularly suitable for powering your trawling motors and other Marine accessories for extended periods of time. The battery is designed with deep recycling in mind, using thick plate technology that allows the battery to be continuously discharged and charged and discharged multiple times, ensuring reliability at sea or outdoors.


Whether sailing in the summer sea breeze or camping outdoors in early April, the OREMA battery provides lasting power and makes your journey more secure. This battery runs quietly, allowing you to focus more on enjoying nature. With OREMA proven Marine/RV power solutions, you can rest assured to enjoy the time with your family close to nature, and OREMA batteries provide you with stable and reliable power support anytime and anywhere.

Features of OREMA Dual Purpose Marine Battery:

1. Ideal for boaters, this battery provides efficient start-up capability and deep cycle power, making it ideal for use in environments where start-up power and reliable power are in high demand.
2. The battery is equipped with a special shock-proof AGM separator, which is effective against vibration and damage, which usually shorten the battery life. Its anti-vibration performance is 20 times that of ordinary flooded batteries, providing excellent shock wave protection.
3. The design pays more attention to durability, so that the battery can withstand the wear and tear during long-term recycling and extend its service life.
4. The battery has excellent electrolyte retention capability to prevent leakage of dry and acidic substances, enhancing safety.
5. In terms of safety, this battery adopts spill-free design to effectively prevent acid leakage, making installation and transportation safer.
6. The application of low current resistance separator improves the current flow, thus speeding up the battery start-up speed and increasing the efficiency.

Applications of OREMA Dual Purpose RV Battery:

Trailer
Marine
Truck
RV
Trolling motor
For all kinds of Vehicles start-stop application, and power supply application

Join the ranks of satisfied adventurers who trust OREMA Dual Purpose AGM Battery for their journeys. With OREMA Battery, power your adventures with confidence and enjoy the peace of mind that comes with unmatched performance and reliability.

Dual Purpose Battery, dual purpose marine battery, dual purpose rv battery, dual purpose battery for truck, Dual Purpose AGM Battery

OREMA POWER CO., LTD. , https://www.oremapower.com