Dajiang new machine debut, what are the key upgrades?

As a drone manufacturer that has received much attention worldwide, DJI is basically a two-time product launch. Last week, it released the last wave of new products in 2016 in Los Angeles. On the top, the highest-end product line "Wu" Inspire2, the highest product in the consumer product line "Phantom4Pro", the latest Zen series two cameras, together in the domestic debut.

Since the parameter configuration and the price have been announced in Los Angeles, in fact, there is nothing new in the domestic situation. Let us first look at the key upgrades of several products:

Inspire2

Dajiang new machine debut, what are the key upgrades?

·The body material is upgraded from the plastic body of the Inspire1 to magnesium alloy, which is more sturdy;

· Support shooting up to 5.2KRAW format video, supporting 14 photos continuous shooting;

· Support both MicroSD card and SSD storage for post-editing;

· Supports CinemaDNG (requires separate purchase license), AppleProRes (requires separate purchase license), H.264/H.265 and other video compression formats;

·The front and the top of the fuselage are equipped with three visual positioning sensors. With the infrared sensor, active hovering and obstacle avoidance can be realized in the positive direction and the upper direction.

·In addition to shooting the camera, additional flight status camera is added to facilitate the flying hands to monitor the film and flight environment at the same time;

· Support smart flight modes such as smart follow and pointing flight.

In addition, the Inspire2 also fits the Zenithuse X4S and X5S cameras. The Zenithuse X4S camera is equipped with a 1-inch, 20-megapixel sensor, 11.6-speed dynamic range, equivalent focal length of 24 mm, using a mechanical shutter; the Zenithuse X5S camera is equipped with a miniature M4/3, 20.8-megapixel sensor with 12.8 The ultra-wide dynamic range of the file supports the replacement of 8 lenses with a maximum aperture of F1.7. In addition, on the official website of Dajiang, we also saw a variety of new accessories, including integrated remote control with display, SSD card reader, wireless focus device and battery StaTIon.

Phantom4Pro

·The use of mechanical shutter and adjustable aperture to effectively avoid photo smear during flight;

· With 1 inch, 20 million pixel sensor, the effective light-sensing area is 4 times that of Elf 4;

· Supports video shooting up to 4K60 frames, and supports 14 continuous shootings in photo shooting mode;

·In addition to the original front and bottom visual positioning sensors, sensors are added to both sides and rear of the fuselage to enable the aircraft to achieve 5-way positioning and 4-way obstacle avoidance;

· Added intelligent flight modes such as reverse pointing flight, free follow, and trajectory flight;

· Added environmental map recognition and drawing functions, and the AR can be used to draw flight routes in the App.

Dajiang new machine debut, what are the key upgrades?

In addition to the upgrade of the fuselage itself, Phantom4Pro also adapts an integrated remote control with a 5.5-inch screen. According to official data from Dajiang, the brightness of this display is twice the maximum brightness of the iPad, which can be extremely strong in the environment. In the case of the case, a clear picture back is also guaranteed.

Dajiang new machine debut, what are the key upgrades?

In addition to introducing new products, in the product experience meeting in Beijing, Dajiang also prepared a live demonstration of several new intelligent flight modes of Phantom4Pro and a demo of actually shooting movies with Inspire2. From the perspective of the demonstration effect, both products have equivalent Good stability, although the temperature of the day of the event fell below zero, the wind was not small, and the operation of the two demonstration machines was not affected.

If the gap between the previous Inspire1 and Elf 4 is not obvious, then the two new products released at the same time are completely divided into two product lines, both in terms of function and operation. Inspire2 is completely Separated from the scope of ordinary civilian consumer-grade drones, Dajiang clearly wants to rely on this product line to take the lead in the film and television field where drones are most likely to be launched. The product logic of Phantom4Pro is completely opposite. From a functional point of view, this product that once required professionals to fly is now becoming more and more fools, plus the Mavic product line of pocket drones just opened this year. Xinjiang has been deepening its efforts in the UAV market segment, leaving little room for other brands.

Elf 4Pro in mainland China is priced at 9,999 yuan (with ordinary remote control), and the Elf 4Pro+ set with integrated remote control is available, priced at 11,999 yuan, the battery price is 999 yuan; "Enlightenment" Inspire2 (excluding the PTZ camera) China's mainland price is 19,999 yuan; Zenith X4S PTZ camera is priced at 3,999 yuan; Zenith X5S PTZ camera is priced at 12,499 yuan. A package version containing Inspire2 (with built-in Adobe CinemaDNG and AppleProRes license) and Zenith X5S PTZ camera will also be available for $39,999.

Through-Wall Terminal Blocks

The Through-Wall Terminal Block adopts screw connection wire technology, the insulation material is PA66, and the connector adopts high-quality high conductivity metal material.Through wall type Terminal Blocks can be installed side by side on the panel with thickness of 1mm to 10 mm, which can automatically compensate and adjust the distance of panel thickness to form a terminal strip with any number of poles, and can be used to increase air gap and creepage distance. Without any tools, the through wall terminal block can be firmly installed in the rectangular reserved hole on the panel, which is extremely convenient for installation.

Through-wall terminal block, structure design feature is easy connection and high contact strengths. These connectors are available in all types of wires with the size from 0.5mm2to 95mm2, and designed in accordance with IEC60947,UL1059,UL486E and CSAC22.2No.158.

Small Terminal Block,Power Terminal Block,Terminal Strip Connector,Terminal Block Connector Types

Suzhou WeBest Electronics Technology Co.Ltd , https://www.webestet.com