Ningbo 300 million US dollars in European lighting fixtures benefit from ROHS new directive
Editor's Note: On the occasion of the implementation of the EU ROHS Directive, the European Commission has recently passed relevant resolutions to amend the ROHS Directive, which was implemented on July 1, 2006. The core of its revision is to exempt the lead used in the luminaire from this resolution. Ningbo City's 300 million US dollars in European lighting products will directly benefit from lead emission lamps (fluorescent lamps) and special purpose lamps in the lead energy-saving lamps contained in linear incandescent lamps (tantal coating) according to the resolution of the European Commission. The lead activator and the main mixture of the lead contained in the fluorescent powder are connected to the lead oxide of the lead oxide professional high-brightness radiation lamp contained in the glass of the bottom layer before and after the flat fluorescent lamp in the liquid crystal display, and are no longer subject to the ROHS directive. The lead content of less than 1000 PPM restricts the newly added ROHS exemption list of the EU, mainly for lead for lamps. This is undoubtedly good news for Ningbo, which accounts for more than 50% of the export volume of mechanical and electrical products, in the first five months of this year. Ningbo lighting fixtures and similar products were exported to the EU totaling US$135 million, an increase of 48.4% over the same period of last year. According to this speed, it is expected that Ningbo lamps will be exported to the EU throughout the year. Over 300 million US dollars "Although the EU ROHS directive exempts the use of lead for lamps, it does not mean that the lamp manufacturers and raw materials and parts suppliers are satisfied." Experts from the Ningbo WTO/TBT Consulting Center said, "According to the ROHS directive The terms and conditions of each exemption in the appendix shall be re-evaluated at least every four years. It is understood that the exemption resolution only exempts certain uses of toxic substances, and the purpose is to gradually replace these toxic substances in electromechanical products. Therefore, Ningbo lamps In order to stabilize the EU market, companies must continue to increase their development efforts to find alternative substances.
1
1
USB 3.0 Hub
USB 3.0 Hub means the data buffering and throughput. They're the USB version of a regular plug extension lead, converting a single USB socket into a hub of them.Another characteristic of USB HUB 3.0 is that they contain more data buffering than USB 2.0 hubs.It store USB 3.0 SuperSpeed packets in a buffer and then retransmit them when there is an available time slot in the SuperSpeed data path.
USB 3.0 Hub,USB HUB M.2 SSD Enclosure,Solid State Drive Housing Case,Type-C to M.2 SSD Box
Pogo Technology International Ltd , https://www.pogomedical.com