How to achieve unattended LED display service
[Source: Gaogong LED 's " LED Good Products" magazine May issue / Xu Faqiang] Large-scale LED display is a common information display window for government enterprises, playing an increasingly important role in real life. The latest synchronous LED display and early LED display require computer control. If it is not displayed all day, it is necessary to switch the computer on and off every day. And the early LED display to prevent loss of control when there is no signal, you need to open the computer and then open the LED display, first turn off the LED display and then turn off the computer. This requires a special person to be responsible.
How can we make it simple and simple, and realize the unattended display service? To solve this problem is to solve the automatic switch machine of the servo computer, including: automatic start-up every day, automatic display of the file after booting, and fixed-point shutdown every day. The implementation method is as follows:
First, automatically start every day
Generally set directly in the BIOS.
Step 1: Start the LED display servo computer, press DEL, enter the BIOS, then select “P OWER MANAG EMENTF EATURES†and enter. Find the "RESTOREONAC /POWERLOSS" item in the power window, press Enter, and then set its value to "P OWE RON" by the arrow keys;
Step 2: Select “RESUME ONRTC ALARM†and press Enter, then set its value to “ENABLE†by the arrow keys; Step 3: Select “RTC ALARMDATE†and press Enter, then set its value to “EVERYDAYâ€, indicating Do the same every day. In the same way, set "RTC ALARM HOURS", "RTCALA RM MI NUT E", "RTM ALARM SECOND" to "07", "55" and "00" respectively, which means that the boot time is "7:55" in the morning. :00", after all settings, press F10 to save and restart.
Since the BIOS of different motherboards is different, some motherboard settings may be different from the above, but just remember to find "WAKE UP" or "Resume byAlarm" in the power management, because this is the setting timer. The option, Figure 1 is an example of setting the timed boot in the BIOS.
Second, boot automatically run display information file
You can use shortcuts.
Step 1: Associate the display file with the display program. For example, the display file is "common.led", the program to open it is "LED.exe", just right click on the "common. led" icon, click on "Properties", click on the "Change" button in the "General" option. Find the program "LED.exe", click "OK", as shown in Figure 2;
Step 2: Generate a shortcut to the display file. Right-click on the "Common.led" icon, click on "Create Shortcut", a "Shortcut to Common.led" icon appears, and then click "Start" and "Run" and "Browse" in the lower left corner of the computer display. Find the "Shortcut to Common.led" file and confirm, see Figure 3, copy the ""...shortcut to common .led.lnk" that appears in the "Open" column, see Figure 4. Note: If you click "OK", you can directly open the display file "Common.led";
Step 3: Set the startup item in the Super Rabbit. Download the Super Rabbit software on the external network and install it on the LED display server computer. Open the "Magic Settings - Create your own system" in the "Bunny Tools", right click in the "Startup Program" and select "New Project" In the "command line" paste "D: LED shortcut to commonly used.led.lnk", the title itself.
After this setting, the open opportunity automatically runs the display file "Common.led", which is the same effect as manually opening "Common.led".
Unfinished , please refer to the May issue of Gaogong LED 's " LED Good Products" magazine.
How can we make it simple and simple, and realize the unattended display service? To solve this problem is to solve the automatic switch machine of the servo computer, including: automatic start-up every day, automatic display of the file after booting, and fixed-point shutdown every day. The implementation method is as follows:
First, automatically start every day
Generally set directly in the BIOS.
Step 1: Start the LED display servo computer, press DEL, enter the BIOS, then select “P OWER MANAG EMENTF EATURES†and enter. Find the "RESTOREONAC /POWERLOSS" item in the power window, press Enter, and then set its value to "P OWE RON" by the arrow keys;
Step 2: Select “RESUME ONRTC ALARM†and press Enter, then set its value to “ENABLE†by the arrow keys; Step 3: Select “RTC ALARMDATE†and press Enter, then set its value to “EVERYDAYâ€, indicating Do the same every day. In the same way, set "RTC ALARM HOURS", "RTCALA RM MI NUT E", "RTM ALARM SECOND" to "07", "55" and "00" respectively, which means that the boot time is "7:55" in the morning. :00", after all settings, press F10 to save and restart.
Since the BIOS of different motherboards is different, some motherboard settings may be different from the above, but just remember to find "WAKE UP" or "Resume byAlarm" in the power management, because this is the setting timer. The option, Figure 1 is an example of setting the timed boot in the BIOS.
Second, boot automatically run display information file
You can use shortcuts.
Step 1: Associate the display file with the display program. For example, the display file is "common.led", the program to open it is "LED.exe", just right click on the "common. led" icon, click on "Properties", click on the "Change" button in the "General" option. Find the program "LED.exe", click "OK", as shown in Figure 2;
Step 2: Generate a shortcut to the display file. Right-click on the "Common.led" icon, click on "Create Shortcut", a "Shortcut to Common.led" icon appears, and then click "Start" and "Run" and "Browse" in the lower left corner of the computer display. Find the "Shortcut to Common.led" file and confirm, see Figure 3, copy the ""...shortcut to common .led.lnk" that appears in the "Open" column, see Figure 4. Note: If you click "OK", you can directly open the display file "Common.led";
Step 3: Set the startup item in the Super Rabbit. Download the Super Rabbit software on the external network and install it on the LED display server computer. Open the "Magic Settings - Create your own system" in the "Bunny Tools", right click in the "Startup Program" and select "New Project" In the "command line" paste "D: LED shortcut to commonly used.led.lnk", the title itself.
After this setting, the open opportunity automatically runs the display file "Common.led", which is the same effect as manually opening "Common.led".
Unfinished , please refer to the May issue of Gaogong LED 's " LED Good Products" magazine.
Shareconn development Co.,Ltd can produce temperature Sensor Wire Harness and thermostat wire harness base on customer requirement.
Wide variety of installation fixtures and probes are available to suit your needs.
Small size and fast response.
Long-term stability and reliability.
Excellent tolerance and interchangeability.
Can be made into high-dissipative then Simplify the test circuit.
Sensor Wire Harness
Sensor Wire Harness,Sensor Wiring Harness,Automotive Sensor Wire Harness,Customized Sensor Wire Harness
Shareconn Development CO.,LTD , http://www.share-conn.com