Explain the opportunities and problems of LED backlight LCD TV area dimming technology

Energy-saving and image quality improvement technology has always been the field of continuous pursuit of innovation in the color TV industry. With the popularity of LCD TVs, regional dimming technology has become one of the best technologies for energy saving and image quality enhancement.

The traditional CRT TV is a flat light source, and its illumination is either illuminated by the whole piece or the whole piece is darkened, and it is impossible to dim the picture according to the picture. The LCD TV display part mainly includes a backlight and a liquid crystal display unit, wherein the backlight mainly adopts a linear light source CCFL and a point light source LED , which provides a possibility for realizing regional dimming. The backlight of the LCD TV is the most energy-consuming part of the whole machine. Therefore, the technology of adjusting the backlight brightness in various ways to achieve energy saving and improving the image quality has been a difficult problem in the industry.

At the beginning of the LCD TV, the backlight brightness is fixed or manually adjusted by the user through the menu, which is similar to the CRT's planar light source, either the whole piece is brightened or the whole piece is darkened. CCFL is a linear light source, so the partition adjustment is technically feasible. As LCD TVs gradually occupy the mainstream of the market, the backlight brightness area adjustment technology has also developed rapidly. After 0-dimensional (0D) Dimming, 1st dimension (1D) Dimming Developed to the current 2nd dimension (2D) Dimming.

Backlight area adjustment technology

LCD TV backlight area adjustment technology, that is, Local dimming technology, refers to the LCD TV system divides the image signal into several areas, and analyzes and calculates the image brightness according to each area, and then automatically controls the brightness and darkness of the backlights in each area.

0D Dimming: refers to the LCD TV system to adjust the brightness of the entire TV screen. Whether it is CCFL backlight or LED backlight , all CCFL tubes or LEDs have the same brightness under the same screen, which is controlled by the system. When darkened or brightened, the system automatically dims or brightens the backlight. The general algorithm is to calculate the average brightness of the entire picture by software, and adjust the backlight brightness according to the average brightness. For example, when the black screen (as shown in Figure 1.1), the CPU automatically adjusts the backlight brightness to the darkest, and when the white screen (Figure 1.2), the CPU automatically adjusts the backlight brightness to the brightest. The disadvantage of 0D Dimming is that the unified adjustment is not accurate enough. For example, when pure white and pure black images appear in the same picture (as shown in Figure 1.3, the black and white pictures are displayed), the system CPU calculates the average brightness and adjusts the backlight brightness to the middle. This will result in a place where pure white is not bright enough, while a place that is pure black is not black enough. So strictly speaking, 0D Dimming does not count regional dimming.

Trailer LED Display is designed as a fully integrated mobile LED video solution. ready to go at any time.

Adaptability:No matter it is sunny or rainy, it does not affect the movement of the truck and the viewing effect of the audience.

High flatness precision: with die-cast aluminum technology, the tolerance of cabinet and module are controlled within 0.1mm, screen flatness and split joint gap are controlled within 0.5mm.

Movement:The product has good shockproof due to the mobility of the truck.For mobile  Trailer Led Display, Its main feature is high level anti-shake, this is very important for movable led screen.

Clear view:High refresh, high gray scale, high color contrast, and high quality picture effect.

Ingress protection:The ingress protection of the front is IP65 as well as the IP54 of the rear,which meets the standard of Outdoor Led Display.

Customized:we can customize the screen size for any trailer model to accommodate the needs of individual customers at any event in as little time as possible.

Advantages

1.High brightness and clearly display effect with easy use control system which allow you to operate easier.

2.High refresh, high gray scale, high color contrast, and high quality picture effect.

3.A features of it is the wide audience range from one place to another due to the mobility of trucks.It also relieved the district restrictions,attract more people to watch.

4.Wide viewing angle (140° in horizontal and 140° in vertical).

5.100% QC inspection before Shipment. Module surface flatness ± 0.5mm, the entire screen has good flatness

Trailer LED Display

Trailer Led Display,Trailer Led Screen,Mobile Trailer Led Screen,Roadshow Trailer Led Display

Shenzhen Bako Vision Technology Co., Ltd. , http://www.rentalleddisplays.com