Ce Approved SMD5050 14.4W Flexible LED Strip Light

DC12V SMD5050 19.8W Flexible LED Strip Light with CE Certificate

1.LED: SMD 5050 high lumen high CRI LED
2. LED Quantity:60pcs/M
3. Circuit Board: Flexible Print Circuit Board(FPC)
4. Special Design: there are 60pieces of LED on one meter strip.
Every 3 pieces of LED constitutes one 50mm long unit and one meter strip has 20 units. Each unit are independent and can be cutted to use as a short strip. Each unit has the max watt of 0.72W.
5. Power(watt): Max 14.4W/Meter. The watt will lower down when the current sets to be lower
6. Working Current: Max 60mA.
Current is sincerely suggested to be lower than 60mA for heat dissipation consideration.
The Strip can be designed to produce constant-current strips to have a better stable brightness.
7. Input Voltage:DC12V
8. Strip width: 10mm(width ranges from 8mm to 18mm)
9. Color Temperature:2700-18000K(Yellow, White,Blue, Red, Green, Purple and etc)


10.CRI:there are three grades can be choosed:>75,>80,>90, With higher CRI, More Pure Color
11. Power Efficiency::≥90lm/W
12. The strip can be supplied with self-adhesive tape on the back for the convenience of installing.
13.IP 44, Indoor application only.
The strip can be supplied with silicon sleeve outside the strip or can be covered by transparent epoxy layer, And the protection grade upgrade to IP65. It can be waterproof and can be used outdoor

Below is the waterproof products: Left:strip with sleeve, Right:strip with epoxy


14.Max Length:5M one strip.
The strip will be packaged in a round roll with max 5 meters one roll.
15. Lifespan: 30000hours
16. Warranty: 2 years.


Main Applications: Trade Term:
1. Payment Term: 30% pre-payment and the balance T/T , Paypal or L/C(if necessary) against the delivery.
2. Delivery Time: 15-30 days.
3. Sample: Avaliable
4. Sample Delivery Time: in 7 days
5. Sample Fee:Yes
   

Below is the common product list of SMD5050 Flexible Strip Light: DC12V SMD5050 19.8W Flexible LED Strip Light with CE Certificate

1.LED: SMD 5050 high lumen high CRI LED
2. LED Quantity:60pcs/M
3. Circuit Board: Flexible Print Circuit Board(FPC)
4. Special Design: there are 60pieces of LED on one meter strip.
Every 3 pieces of LED constitutes one 50mm long unit and one meter strip has 20 units. Each unit are independent and can be cutted to use as a short strip. Each unit has the max watt of 0.72W.
5. Power(watt): Max 14.4W/Meter. The watt will lower down when the current sets to be lower
6. Working Current: Max 60mA.
Current is sincerely suggested to be lower than 60mA for heat dissipation consideration.
The Strip can be designed to produce constant-current strips to have a better stable brightness.
7. Input Voltage:DC12V
8. Strip width: 10mm(width ranges from 8mm to 18mm)
9. Color Temperature:2700-18000K(Yellow, White,Blue, Red, Green, Purple and etc)


10.CRI:there are three grades can be choosed:>75,>80,>90, With higher CRI, More Pure Color
11. Power Efficiency::≥90lm/W
12. The strip can be supplied with self-adhesive tape on the back for the convenience of installing.
13.IP 44, Indoor application only.
The strip can be supplied with silicon sleeve outside the strip or can be covered by transparent epoxy layer, And the protection grade upgrade to IP65. It can be waterproof and can be used outdoor

Below is the waterproof products: Left:strip with sleeve, Right:strip with epoxy


14.Max Length:5M one strip.
The strip will be packaged in a round roll with max 5 meters one roll.
15. Lifespan: 30000hours
16. Warranty: 2 years.


Main Applications: Trade Term:
1. Payment Term: 30% pre-payment and the balance T/T , Paypal or L/C(if necessary) against the delivery.
2. Delivery Time: 15-30 days.
3. Sample: Avaliable
4. Sample Delivery Time: in 7 days
5. Sample Fee:Yes
   

Below is the common product list of SMD5050 Flexible Strip Light:

HNB Device

"Non-burning, nicotine for users, low tar content. As the heating temperature (below 500℃) is lower than the combustion temperature of traditional cigarettes (600-900℃), the harmful components produced by tobacco high-temperature combustion pyrolysis and thermal synthesis are reduced, and the release amount of side-flow smoke and environmental smoke (second-hand smoke) is also greatly reduced."

Heating non - combustion products are electronic devices containing tobacco. When you heat them, they produce a nicotine-containing vapor that you can inhale.

They are different from traditional cigarettes and work by heating tobacco to a very low temperature. Tobacco is heated to 350 ° C in a heat-incombustible device, while traditional cigarettes burn at up to 900 ° C.

Still, the temperature at which non-combustion products are heated is high enough to vaporize and inhale harmful chemicals.

Although both are electronic devices, heated non-combustible products are also different from e-cigarettes or steam devices. These usually use chemical liquids and do not necessarily contain nicotine. E-cigarettes tend to heat liquids to around 250 degrees Celsius to produce vapor.

Hnb Device Oem,Hnb Device Patent,Hnb Device,Hnb Device For Sale

Shenzhen MASON VAP Technology Co., Ltd. , https://www.masonvap.com