10FT Cab-X21mt Cisco HD60 Male to dB15 Male Cable

10FT CAB-X21MT Cisco HD60 Male to DB15 Male cable
This 10 foot high quality serial cable features a HD60 male connector on one end and a DB15 male connector on the other end. It is compatible with Cisco part number CAB-X21MT-10. The DB60 is the Cisco end and the DB15 end is the network end. It is commonly used with the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards.
1)Connector 1:High density DB60 pin male,Connector 2:DB15 pin male
2)Color:Dark blue
3)Length:10FT
4)Conductor:28 AWG Stranded Copper
5)Application:for the Cisco 7000 family/4000/3600/2500/1600 series
6)Original Cisco part No.CAB-X.21MT 72-0789-01


  10FT CAB-X21MT Cisco HD60 Male to DB15 Male cable
This 10 foot high quality serial cable features a HD60 male connector on one end and a DB15 male connector on the other end. It is compatible with Cisco part number CAB-X21MT-10. The DB60 is the Cisco end and the DB15 end is the network end. It is commonly used with the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards.
1)Connector 1:High density DB60 pin male,Connector 2:DB15 pin male
2)Color:Dark blue
3)Length:10FT
4)Conductor:28 AWG Stranded Copper
5)Application:for the Cisco 7000 family/4000/3600/2500/1600 series
6)Original Cisco part No.CAB-X.21MT 72-0789-01


 

Lock Motor

Lock motor product introduction:

Intelligent lock motor, also known as electronic locks, the product effectively combines the advantages of traditional electronic locks and electromagnetic lock overcame the electric lock too much noise, electromagnetic lock power shortage and the development of new products, and spiritual compared with electric control lock and magnetic locks, lock its performance more perfect, more obvious advantages.

Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc

Features:Lock motor is based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;

This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability

Method of use: the best stable in horizontal plane, installed on the lock motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc lock motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

Operating temperature range:

lock motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.

If a lock motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.

Storage temperature range:

lock motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.

Service life:

The longevity of lock motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you

Looking forward to your inquiry. Welcome to our factory.

Lock Motor,Intelligent Lock Motor,Smart Lock Motor,Fingerprint Lock Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com