Output (4-20mA) Ultrasonic Sensor for Water Level Detecting 1m 2m 3m ~8m

Model NO.: QUW-3
Detection mode: Direct Reflection Type
IP Rating: IP67
Certification: ISO
Customized: Customized
Types: Non Contact
Power Supply: 12/24VDC
Beam Angle: 15°,12°,9°
Detection Accuracy: 0.25 ~ 0.5% Fs
Blind Area: ≤ 100 ~ 800mm (According to Different Range)
Trademark: QYE
Transport Package: Inner Side Plastic Bags, Outside Carton Box
Specification: CE, Rohs, Ex, ISO9001.2000
Origin: Shaanxi, China
HS Code: 902690000
Output (4-20mA) Ultrasonic Sensor for Water Level Detecting

Features:

1. Non contact,low price
2. Easy to installation
3. Small in size, light in weight
4. 12/24VDC Power supply
5. Long working life and high reliability.

Dimensions and Connections:

Output (4-20mA) Ultrasonic Sensor for Water Level Detecting 1m 2m 3m ~8m


Technical Specifications:
Part number NU75F30TR1MD
Sensing range sd 230 ~ 4000 mm
Resolution 1 mm
Adjustment Yes
Sonic frequency 75 KHz
Response time 30 ms
Voltage supply range +Vs 10~30 VDC
Current consumption max. 35 mA
Output signal 4~20ma
Adjustment Yes
LED yellow solid yellow: object in the evaluation range
    yellow   flashing: program function, object detected
LED red solid red: Error
    red   flashing: program function, object not detected
Type   Cylindrical
Housing material nickel-plated /ABS
Width / diameter 30 mm
Height / length 90 mm
Connection types Connector M12
Operating temperature -25~ +70 °C
Storage temperature -40~+80°C
Protection class IP 67



Programmed Analogue Output Function:

Output (4-20mA) Ultrasonic Sensor for Water Level Detecting 1m 2m 3m ~8m
A1: unusable area
A2: nominal sensing range
Mode of operation: rising ramp
 
  1. Adjusting The Evaluation Limits
 
The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply voltage -U or +U to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1s. LEDs indicate whether the sensor has recognized the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught with -U, A2 with +U.
 
TEACH-IN rising ramp (A2 > A1)
 
  • Position object at lower evaluation limit
  • TEACH-IN lower limit A1 with - U
  • Position object at upper evaluation limit
  • TEACH-IN upper limit A2 with + U
 
TEACH-IN falling ramp (A1 > A2):
 
- Position object at lower evaluation limit - TEACH-IN lower limit A2 with + U
 
- Position object at upper evaluation limit - TEACH-IN upper limit A1 with - U

6. LED Displays
 
Displays in dependence on operating mode Red LED Yellow LED
     
Teach-In evaluation limit    
Object detected Off Flash
No object detected Flash Off
Object uncertain (Teach-In invalid) On Off
Normal mode (evaluation range) Off On
Fault On Previous state
 

Notes
1: Precision instrument, please don't scratched the surface.
2: Do not use in strong acid and strong alkaline conditions.
3: Shall not be opened.
4: Cannot be used in the vacuum area or explosion-proof areas.
The interpretation is owned by us. If you have any questions, please feel free to contact us.

Contact Details:
Output (4-20mA) Ultrasonic Sensor for Water Level Detecting 1m 2m 3m ~8m
 

Link Fittings

Cutout Fuse Co., Ltd. , http://www.nsindoorfuse.com