Five 3,000 yuan price recording studio monitor headphones horizontal evaluation recommended

When we record a record, we usually choose to choose a microphone for different instruments. For example, a dynamic microphone is suitable for snare drums, an aluminum ribbon microphone is suitable for small, and a large diaphragm microphone is suitable for human voice. However, when it comes to another important sensor in the studio – stereo headphones, when drummers are recording and need to listen carefully, we also equip them with the same demanding equipment.

It's not uncommon for headsets to have a wide retail price range, and higher-priced headphones can reproduce sound balance and accuracy very well. In this article, we will focus on some mid-priced headphones, ranging in price from $199 to $499, and are ideal for editing, mixing, mastering, and overall monitoring. . Please note that all prices here are retail prices unless otherwise stated.

All the headphones we talked about in this article are amp styles. As the name implies, these headphones can cover your entire ear, and most of these headphones have a closed design. This design is very good. Isolation of the outside world. There is a 3.5 mm plug on the top of each model's headphone cable, but a 1/4' connector can also be used for the connection.

Audition before buying

Whenever I buy a new headset, I use it to listen to a variety of different musical styles to test. These include unmixed vocals and instruments, as well as audio tracks of different resolutions after mixing and post-production. Each headset has its own sound, and you can almost immediately hear the difference.

Therefore, the material quality, construction quality, durability and price of the earphones are all important factors in determining the purchase. Of course, people think that one is better than the other and sounds subjective. So choosing a headset should be based on your personal preferences, the type of music work you are working on, and the feeling it brings to you when its sound is transmitted to your ears and head. Even if you don't plan to use it throughout the recording process, you will wear it for at least some time, so their comfort is also important. However, the only way to find this is to constantly test it on the basis of your interest.

Price: 270 USD

AIAIAI TMA-1 Studio: Young Guru Edition

For this listening headset that can be listened to carefully, AIAIAI invites the Grammy-winning mixing engineer/famous music producer Young Guru to develop it, not only for professional mixing and mastering, but also for professional mixing and mastering. Listen casually in your life. The TMA - 1 Studio has a 40 mm diameter unit with a frequency range from 20 Hz to 20 kHz. Unlike the other models of AIAIAI, this has the most balanced sound quality. The frequency response plots it provides clearly show that they have brighter high frequencies, more low frequencies, and sharper sound quality than the other models in the article.

In this article, the TMA-1 Studio is also the lightest headset, and they are very comfortable to wear. According to the manufacturer, the round earmuffs are designed with a Japanese-made memory foam and can be adjusted to the level of comfort you want, with maximum noise isolation.

The kit also includes two detachable cables that can be mounted securely with a clockwise rotation. The two sections of the standard wire are straight, the middle part is curled, and the inner material of the wire can be tightly wrapped. The 3.5 mm plug is also equipped with a protective spring. The other cable offers a 3.5mm TRRS connector, a built-in microphone and three buttons for controlling iOS devices: this means you can use these buttons to answer calls without having to operate your phone – it's just too sweet Now!

Price: $199

Audio-Technica ATH-M50

The ATH-M50 is a mid-priced and popular model, and there are plenty of reasons to prove its quality: although this headset may sound less loud than other models listed in this article, this one Headphones can reproduce transients in a very natural way. This is evident in acoustic instruments such as guitar playing and metal percussion.

The ATH-M50 uses a 45 mm enamel drive unit with a frequency range from 15 Hz to 28 kHz. It is worth noting that its high frequency is very round, but it does not have the brightness of modern sound like TMA-1 Studio or Snoy's MDR-7520 headphones. In addition, the bass zone of the ATH-M50 sounds very solid, clear and the same is true for the midrange. Therefore, when you need to find different auditory effects when mixing, the ATH-M50 can make up for the approach monitoring.

Overall, the overall construction of the ATH-M50 is still very good, even at the top of the cable there is a spring that releases tension. The head is filled with a comfortable sponge, and the earmuffs have a conical shape that is moderately isolated from the outside world. The earmuffs have three attachment points that you can adjust to a very comfortable position on your head or fold into a suitable shape package.

The ATH-M50 is available in white and black for a limited amount of red. Straight wire or spiral wire can be selected for black, and spiral wire for white and red. Audio-Technica will also provide a two-year effective quality guarantee for this product.

Price: 399.65 US dollars

Sennheiser HD600

This headset has been touted by earphone enthusiasts as the best headphones for recording classical music. The Sennheiser HD 600 is the only open earphone in this article. Therefore, if you are looking for a headset with good sound insulation, whether it is from the inside (for you, listening) or externally, this headset is not the best choice. However, if you are looking for a headset with a natural sound, then it will be a good choice.

The open design helps the HD 600 provide a very rounded sound for the entire frequency spectrum, while below is some knowledge that will not be told in the specification: The frequency response range given in this manual is from 16Hz to 30kHz and - A tolerance of 3 dB, and the frequency range at 1 kHz is 12 Hz to 39 kHz and -10 dB. However, it is surprising that the headphone is flat at 90 Hz and 15 kHz (±4 dB) in the frequency response diagram.

So don't be surprised, the playback will not be too intense. And this is also due to the open design of the HD 600, it will very well reduce the "closed" feeling, I believe many people who use closed headphones will have a considerable feeling, especially when they do not need to use headphones for sound insulation . This is definitely a headset that is suitable for long-term wear.

The HD 600 oval ear caps are very close to the ears, and the velvet lining provides great comfort. The adjustable headband is able to fit very tightly with the additional material on the underside. The headset weighs 0.5 pounds and does not include cables.

The HD 600 is equipped with a 9-foot detachable straight wire and the velvet ear pad is also replaceable. In fact, these headphones are completely detachable if you need to replace any parts. Unlike the other headphones in the article, the HD 600 does not have a storage bag, but it does provide a hinged lid.

The Sennheiser's other open-ended headset is the HD 650, which is said to have a better "smiley curve", which means that the low frequency and high frequency are subtly enhanced. Its frequency response range is 16Hz-30kHz/-3dB and 10Hz-39.5kHz/-10dB. In addition, the manual also states that sensors in this mode will have a tolerance of ±1 dB between them. The HD650 also comes with a detachable wire and replaceable ear pads.

Priced at $375

Shure SRH940

Designed by Shure, the SRH940 headphones feature a smaller é’• drive unit with a diameter of 40 mm, which is much smaller than the other headphones in this article. The published frequency range is 5 Hz to 30 kHz. It's worth noting that the sound of this headset seems to lack some significant stimuli at the end of the spectrum.

When used, the SRH940 offers quite a bit of detail. This headset is very good for transients, provides a very warm, realistic Latin tambourine sound, and provides extra brightness in the case of high frequency sources such as hi-hats and Shaker (a type of percussion). The low frequency response is also very good, allowing you to clearly distinguish between the synthesizer pop, Moog bass, electric bass and kick drum. In addition, this earphone also has a good effect on the intermediate frequency, which provides a very neat sound for the instruments in this frequency region. For me personally, the sound of this SRH940 is very "smooth".

The SRH940 headset comes in a hard case as a package and offers two detachable wires, a 10-inch long spiral wire and a nearly 9-foot straight wire. Rotate clockwise to secure or remove the wire. Soft ear pads can also be replaced. When not in use, you can rotate the headset 90 degrees in one direction and fold it up. Four sponge pads under the headband provide maximum comfort.

Price: $499.99

SONY MDR-7520

I believe that when you first see the MDR-7520, you will notice that its headphones are oval, so you can put it on your ears very naturally. In addition, the headset has an offset of about 20 degrees, so the headband will tilt slightly forward when worn. Coupled with a lighter design, the MDR-7520 is also very easy to wear.

According to Sony, the 50mm transducers offer "high definition" and their performance is true: compared to the other headphones in this article, this headset allows the author to listen more carefully, even in I did not see it before I read the copy. This headset focuses on the bass and midrange range, and I personally think this MDR-7520 allows me to hear more background details in my music, something that other headphones can't. Of course, the MDR-7520 also shows a crisp high frequency, which I think of other Sony headphones that have been used for many years. Its propaganda document pointed out that the frequency response of the headphones is 5Hz to 80kHz, but no tolerance is written.

Still, I still choose it as a monitor, because the sonic angle it provides is not available in other models or in my studio monitor. The MDR-7520 can help me hear the details of the reverberation of the instrument during the mix, or help me determine if there are too many tones in the vocal part. In the case of good recording materials, this MDR-7520 will not make you tired when used for a long time. But if you're listening to those over-compressed and heavily mixed sounds, this headset will let you know right away.

The MDR-7520 headset is also equipped with a detachable cable that plugs into the headset very firmly. In addition, this headset does not provide folding, but they are still stored in the included bag.

335 LED Strip

LED Power Supply Co., Ltd. , http://www.szledstrip.com